3
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 37
Administration: System Logs
This chapter describes the System Log feature, which enables the switch to keep
several independent logs. Each log is a set of messages recording system events.
The switch generates the following local logs:
• Log sent to the console interface.
• Log written into a cyclical list of logged events in RAM and is erased when
the switch reboots.
• Log written to a cyclical log file saved to flash memory and persists across
reboots.
In addition, you can send messages to remote SYSLOG servers in the form of
SYSLOG messages.
This chapter covers the following topics:
• Configuring System Log Settings
• Configuring Remote Logging Settings
• Viewing Memory Logs
Configuring System Log Settings
You can enable or disable logging on the switch and select the events to be
logged by severity level. The event severity levels are listed from the highest
severity to the lowest severity:
• Emergency—System is not usable.
• Alert—Immediate action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
To Next Page
Loading...
Need help?
General
