Cisco TelePresence System EX Series Administrator Guide
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014. www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
19
Navigate to: Call Control
Controlling your camera
You can control the camera from the Call Control page (only
available for EX90).
The camera controls (zoom) are available when the cursor
is placed in the Main Source video area. Live snapshots are
automatically taken during this period.
Note that the camera controls are not available if the system
is in standby mode.
Zoom
Use + and - to zoom in and out.