139
INJECTION
ANTI-POLLUTION TECHNICAL CHECKS (FRANCE)
ALL TYPES
All Types Petrol CO Corrected (In %)
All Types Diesel (m -1)
Conditions : At idle, engine warm.
# 01/96
Less than 4.5 % for vehicles registered before 10/86.
Less than 3.5 % for vehicles registered after 10/86.
With catalytic converter
Greater than 2.0i 89 M.Y.
All Types 93 M.Y.
CO less than 0.5 % at idle speed.
CO less than 0.3 % at fast idle speed between 2500 and 3000 rpm (*)
(*) Except :
TU5 JP : 2200 rpm ± 100.
XU5JP : 1500 rpm or 3100 rpm (± 100).
XU7JP : 1500 rpm or 3100 rpm (± 100).
NOTE : On XU5JP and XU7JP engines at 1500 rpm, the check should
be carried out with main beams, rear heated screen and cabin ventila-
tion switched on and with the front wheels on maximum lock (if the
vhicle has power-assisted steering).
Lambda Probe value 0,97 to 1,03.
Features :
Xantia, MMDCM injection on 1.6i (BFZ) engine, 1.8i (LFZ) engine and 2.0i
(RFX) engine.
Should the check reveal excessive CO, make sure that the ECU channel
25 is not connected to earth in error.
(See Info-rapid N
° 77)
01/96 #
Atmospheric engine.
Less than 2.5 m -1
Turbocharged engine.
Less than 3.0 m 1
To Next Page
Loading...
Need help?
General
