192
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMENDATIONS – PRECAUTIONS (AUTOMATIC GEARBOX - MB3)
Engine : KFW
PRE-REPAIR PROCEDURE (continued)
Negative pressure circuit.
- Check the negative pressure circuit.
- Carry out the necessary repairs.
Checks using the diagnostic tool.
Preliminary checks :
- The adjustment of the gear selection control.
- The adjustment of the accelerator cable.
Carry out the necessary operations
Reading the fault codes
Read the fault codes.
Absence of fault codes
Measure the parameters.
Anomalies present:
- YES : Carry out the necessary repairs.
- NO : Check (adjust the negative pressure capsule).
ESSENTIAL
: Initialise the ECU
Perform a road tes
Fault codes present
Carry out the necessary repairs.
Clear the fault codes.
ESSENTIAL : Initialise the ECU
Perform a road test.
SAXO