Protects the components of the engine
and provides access for checking
levels.
Opening
Lift the lever B and raise the bonnet.
Unclip the strut C from its hous-
ing and pivot it to insert it in the
notch D indicated by a yellow ar-
row.
Fix the strut in the notch to hold
the bonnet open.
Closing
Take the strut out of the support
notch.
Clip the strut in its housing.
Lower the bonnet then slam it
fi rmly at the end of its travel.
Pull on the bonnet to check that
it is secured correctly.
To avoid any risk of burns, only
handle the bonnet strut by its yel-
low end.
The location of the interior control
prevents opening of the bonnet
while the driver's door is closed.
This operation must only be carried
out when the vehicle is stationary.
Avoid opening the bonnet in strong
winds.
Open the driver's door.
Pull the interior control A , located
at the bottom of the door frame.
To Next Page
Loading...
Need help?
General
