without bend lighting
with bend lighting
"Bend lighting" function
With dipped or main beams, this
function provides additional lighting
for the inside of a bend, when the
vehicle speed is below 25 mph (ap-
prox 40 km/h).
This lighting is most useful when
travelling at low and medium speed
(urban driving, winding road, inter-
sections, parking manoeuvres...).
Activation
This function is activated:
- when the direction indicator is
activated,
- from a certain angle of rotation of
the steering wheel.
Deactivation
This function is deactivated:
- below a certain angle of rotation
of the steering wheel,
- when stationary or at very low
speed,
- when reverse gear is engaged,
- when the directional headlamps
are switched off.
To Next Page
Loading...
Need help?
General
