TRIP COMPUTER/VEHICLE PARAMETERS
The range, the current consumption
and the distance remaining.
- The "1" (route 1) tab with:
The average speed, the average
consumption and the distance
travelled calculated over route "1".
- The "2" (route 2) tab with the same
functions for a second route.
displays the distance which can travelled with the remaining
displays the distance which can travelled with the remaining
fuel detected in the tank, in relation to the average consumption over
fuel detected in the tank, in relation to the average consumption over
the last few miles (kilometres).
This displayed value may vary signifi cantly following a change in the
This displayed value may vary signifi cantly following a change in the
vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 5 litres of fuel, the range is recalculated and
After fi lling with at least 5 litres of fuel, the range is recalculated and
is displayed when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of the
If, whilst driving, dashes are displayed continuously in place of the
digits, contact a CITROËN dealer.
If, whilst driving, dashes are displayed continuously in place of the
digits, contact a CITROËN dealer.
If, whilst driving, dashes are displayed continuously in place of the
only calculated and displayed above 20 mph
only calculated and displayed above 20 mph
this is the average quantity of fuel
this is the average quantity of fuel
consumed since the last trip computer zero reset.
calculated since the last trip computer zero
calculated since the last trip computer zero
Distance remaining to the destination:
calculated with reference
calculated with reference
to the fi nal destination, entered by the user. If guidance is activated,
to the fi nal destination, entered by the user. If guidance is activated,
the navigation system calculates it as a current value.
this is the average speed calculated since the last
this is the average speed calculated since the last
trip computer zero reset (ignition on).
Each press of the button at the end of the wipers stalk displays the
Each press of the button at the end of the wipers stalk displays the
various trip computer data in succession, according to the display.
various trip computer data in succession, according to the display.
To Next Page
Loading...
Need help?
General
