SETTING THE DATE AND TIME
Set the parameters using the ring and
move on to the next by moving the
Select the DATE FORMAT function
Select the format required using the
ring and press OK to confi rm.
Select the SET DATE AND TIME
function and press OK to confi rm.
Pressing the SET UP button for more than 2 seconds permits
Pressing the SET UP button for more than 2 seconds permits
Select the TIME FORMAT function
Select the format required using the
ring and press OK to confi rm.
Select the DATE AND TIME function
DESCRIPTION OF THE UNIT
GPS COVERAGE
DEMO MODE
DATE AND TIME
Principle of the GPS synchro:
1. Confi rm the "GPS synchro" selection, the time is then set to GMT universal time, the date is also
2. Using the 4-direction navigator, move to the time fi elds and press OK.
3. You can then use the ring to set the time to the time zone of your choice.
Take care when changing between summer/winter time, the time zone must be changed again
This function provides access to the options according to the SETUP fl ow chart.