P R A C T I C A L I N F O R M A T I O N
Changing the lamps on the wing
Remove the lateral boot trim fl ap
A . To do so, pull it towards the
inside of the boot, then pull it up-
wards.
Disconnect connector B .
Unscrew the 2 fi xings C .
Remove the lamp from its housing.
Detach the bulb holder D .
Replace the bulb.
Replace the bulb holder D .
Place the lamp in its housing.
Screw in the 2 fi xings C .
Connect connector B .
Refi t the trim A .
You can use the spare wheel jack
handle to screw or unscrew the fi x-
ings C .