1. Adjustments to the height and
angle of the head restraint
To raise it, pull upwards.
To lower it, press on the control
A to unlock it, and simultaneously
on the head restraint itself. The
adjustment is correct when the
top edge of the head restraint is
at the same height as the top of
the head. It is also tilt adjustable.
To raise it, press control A to
unlock it, then pull it upwards. It
may be necessary to adjust the
backrest angle.
2. Adjustment of the backrest
angle
Operate the control and adjust
the position of the backrest to
the front or to the rear.
3. Adjustment of the seat height
Raise or lower the control the
number of times required to ob-
tain the desired position.
4. Longitudinal adjustment of
seat
Lift the control bar and adjust to
the desired position.
5. Adjustment of lumbar support
Turn the control and adjust to the
desired position.
6. Heated seat controls
The heated seats only operate
when the engine is running.
Seat consisting of a seat cushion, seat back and head restraint which can all be
adjusted for optimum driving comfort.
For your safety, do not drive with
the head restraints removed; they
must be in place and correctly ad-
justed.
To Next Page
Loading...
Need help?
General
