With the engine off, programmable
heating preheats the coolant circuit
in order to optimise the engine op-
erating temperature prior to starting.
The programmable heating sys-
tem can be started immediately or
delayed thanks to its programming
function.
With the engine idle or the vehicle
stationary, it is normal to hear a
high-pitched whistling noise and
to notice some smoke/emissions.
Digital programmer
The heating system’s programmer is
located on the left-hand side of the
dashboard.
1. Time or remaining functioning
time.
2. Increase (time).
3. Select programme.
4. Programme number selected.
5. Immediate start-up of heating.
6. Time adjustment and reading
warning lamp.
7. Reduce (time).
8. Heating mode warning lamp.
9. Programmable heating system
warning lamp.
● LED lit: Activated.
● LED off: Deactivated.
Setting the time
Hold button 3 down and press
button 2 or button 7 . Release
button 3 , the time is displayed
and symbol 6 fl ashes.
Use the two adjustment but-
tons 2 (to go forward) or 7 (to go
back) until the correct time is dis-
played.
Holding these buttons down will
make the numbers displayed scroll
more quickly.
* According to country.
To Next Page
Loading...
Need help?
General
