CKD RAPIFLOW FSM3 Series User Manual

9
[Example of model No.]
FSM3-B005U1BH1J1N-DHS-P70
Model: RAPIFLOW FSM3 Series
A
Display B : Bar display
B
Flow rate range 005 : 500 mL/min
C
Flow direction U : Uni-direction
D
Body material/compatible fluids 1 : Resin/air
E
Port size BH :
Push-in
(φ4 mm for tube)
F
Piping direction 1 : Straight
G
Output specifications J : Analog voltage output × 1
H
Unit specifications 1 : SI units only
I
Valve option N : None
J
Cable D : 4 conductor 3 m
K
Mounting attachments H : Bracket
L
Attachments S : Company certification + traceability certificate
M
Clean-room specifications P70 : Anti-dust generation
C
Flow direction
D
Body material/compatible uids
A
Display
B
Flow rate range
(full scale ow rate)
Model No.
E
Port size
H
Unit specications
L
Attachments
F
Piping direction
G
Output specications
J
Cable
M
Clean-room
specications
I
Valve
option
K
Mounting
attachments
FSM3
Series
How to order
Precautions for model No. selection
*1: During selection, always check the compatibility table on the
next page.
*2: When using in combination with the separate display (FSM2-D),
select ["J": Analog voltage output × 1].
*3: Check using the connection shape and dimensions (page 11) of
the G screw when selecting.
*4: Note that if you mount the elbow fitting in a downward position,
it will interfere with the DIN rail mounting.
*5: Connection to solenoid valves (EXA series) is possible with the
dedicated fitting. Refer to page 41.
*6: Be sure to set EXA to the OUT side of the product.
Use a lead wire for the EXA coil option. The DIN terminal box
cannot be mounted because it will cause interference. After
making sure it is connected firmly, confirm that there is no
external leakage.
*7: "Panel mount" option cannot be selected.
Note that the bracket mounting position may interfere with the
elbow fitting.
*8: Optional parts will come with the product. They are not pre-
assembled.
*9: Product surface is degreased before packaging and heat sealed
into an antistatic bag on the clean bench (Class 1000 and over).
*10: The wetted section is degreased in addition to the
specifications on P70.
Code Content
A
Display
B Bar display
B
Flow rate range (full scale ow rate)
005 500 mL/min 500 50 L/min
010 1 L/min 101 100 L/min
020 2 L/min 201 200 L/min
050 5 L/min 501 500 L/min
100 10 L/min
102 1000 L/min
200 20 L/min
C
Flow direction
U Uni-direction
B Bi-direction
D
Body material/compatible uids
Body material Compatible uids
1 Resin Air
E
Port size
BH Push-in (for φ4 mm tube)
AB G1/8 *3
CH Push-in (for φ6 mm tube) BB G1/4 *3
DH Push-in (for φ8 mm tube)
CB G1/2 *3
EH Push-in (for φ10 mm tube)
AC NPT1/8
HH Push-in (for φ1/4" tube) BC NPT1/4
JH Push-in (for φ3/8" tube)
CC NPT1/2
AA Rc1/8
BA Rc1/4
CA Rc1/2
F
Piping direction
1 Straight
2 Elbow *4
G
Output specications
J Analog voltage output × 1-point
K Analog current output × 1-point
H
Unit specications
1 SI units only
I
Valve option
N None
E
EXA connecting tting (EXA sold separately) *5, *6
J
Cable
Blank None
C 4 conductor 1 m
D 4 conductor 3 m
K
Mounting attachments *7, *8
Blank None
H Bracket 1 (for models 200 L or less)
J Bracket 2 (for models 500 or 1000 L)
M DIN rail mounting (for models 200 L or less)
L
Attachments
Blank None
R Company certication
S Company certication + traceability certicate
M
Clean-room specications
Blank None
P70 Anti-dust generation *9
P80 Oil prohibited *10
FSM3 005 BH P70
UB 1 1 J N1 D H S
LCD displayBar display
IO
-
Link
Internal
structure
Separate
display
Technical
data
Operating
method
Optional
products
Safety
precautions
Related
products

CKD RAPIFLOW FSM3 Series Specifications

General

Brand	CKD
Model	RAPIFLOW FSM3 Series
Category	Accessories
Language	English