Modules & Options
Bluetooth Module 7 - 33
7
Bluetooth & WLAN Combo Module Configuration
This information applies to the combo Bluetooth and WLAN module only.
Setup your Bluetooth Device so the Computer Can Find it
1. Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on.
2. Make the device discoverable (to do this check your device documentation).
To Turn the Bluetooth Module On
1. Press the Fn + F12 key combination to power on the Bluetooth module.
To Add a Bluetooth Device
1. Double-click the My Bluetooth application on the desktop (or access it from the
Programs/All Programs menu).
2. Double-click the device you want to pair with the computer (if no devices appear
press F5 or click the Refresh button to search for devices).
Bluetooth Module &
Resuming From Sleep
Mode
The Bluetooth module’s de-
fault state will be off after re-
suming from the Sleep
power-saving state. Use the
key combination (Fn + F12)
to power on the Bluetooth
module after the computer
resumes from Sleep.
Figure 7 - 21
My Bluetooth
Devices
To Next Page
Loading...
Need help?
General
