CLIVET WSAT-2 User Manual

14
®
- Installation must be performed following all the safety standards, with reference to the installation manual. Incomplete
or incorrect installation may cause serious personal injury, as the result of fire, electric shock, the falling of the unit or
water leaks.
- Avoid accidental contact with the compressors and outlet tubing, as this may cause burns and injuries. Always use protective gloves.
- Avoid entering the danger zone. Use appropriate clothing and glasses. The expelling of the refrigerant gas due to the activation of
the fuse plug or the safety valves may cause injuries and intoxication.
- Incorrect installation may cause water leaks, electric shocks or fires; contact an authorised reseller or specialised installer, keeping in
mind that faults caused by incorrect installation are not covered by warranty. The units must be installed in an easily accessible site:
any additional costs resulting from the hire of special equipment for the maintenance of the unit are completely at the customer’s
expense.
- Do not use the switch with wet hands. This may cause electric shocks.
- Never clean the appliance using water. This may penetrate into the unit and damage the insulation, and possibly cause electric
shocks.
- Do not insert objects in the air outlets or inlets. As the fan works at high speed, this may cause injuries or damage the unit.
- Securely fasten the cover of the unit’s electrical components. Failure to fasten the cover properly may lead to fires and electric
shock, due to dust, water, ...
- Use protective gloves to avoid injury due to contact with sharp edges.
- Never place a combustion appliance directly below the flow of air to the appliance. This may have negative affects on the
combustion process.
- Keep pets and plants away from the flow of air. They may be injured or damaged.
- Never touch the ventilation fins when the appliance is in operation. The blades may cause injuries.
- Carefully check that the unit is secured to the ground to avoid injury due to the unit tipping over.
DANGER!
- Never leave any compressor outlet and inlet valves closed when the machine is off. This may cause explosion due to an increase in
the room temperature (fires), with the consequent possibility of injuries, intoxication, serious burns, death.
- Securely install the appliance at a point that is able to support the entire weight of the appliance. Installation at points that are not
sufficiently secure may cause the appliance to fall and consequently cause possible injury and damage.
Residual Risks
R-407C
IDENTIFYING ELEMENTS FOR THE SUBSTANCE
- Product name: forane 407C N°SDS 01965/1
- Supplier: ELF ATOCHEM ITALIA, Via G.Murat 17, 20159 Milano tel. 02/668111
COMPOSITION
Chemical nature of the compound: mixture based on:
- Forane 32(difluoromethane) (N° CAS: 75-10-5)
- Forane 125 (pentafluoroethane) (N° CAS: 354-33-6)
- Forane 134a (1.1.1.2 tetrafluoroethane) (N° CAS: 811-97-2)
REFRIGERANT SAFETY CHARTS
- Avoid accidental contact with the exchanger coils, by always using protective gloves and applying the special protective grilles.
Contact may cause minor injuries.
- In the case of anomalies (burning smell, smoke) stop the appliance and turn off the automatic switch. Continuing to operate the unit
in abnormal conditions may cause fire, damage, etc. Contact the manufacturer’s authorised service centre.
- Check that there are no refrigerant gas leaks once installation has been completed.
- Do not install the appliance in sites where there are sporadic or possible leaks of flammable gas. If gas accumulates in
the area surrounding the unit, explosions may occur.
- Never turn the unit on or off using the mains switch. This may cause electric shock or fires due to the generation of heat.
- Make sure the main isolator switch is open and padlocked before removing guards, in that contact with the live parts that are
accessible after having removed the guards may cause death by electrocution or serious burns.
- Pay special attention when earthing the metal earth of the machine, making sure that the metal earth is not live and may thus cause
death by electrocution.
- No repairs may be performed by the customer. Carrying out such operations incorrectly may lead to fires, electric shock,
injuries from the unit falling, water leaks, etc. Contact the manufacturer’s authorised service centre.
- Pay special attention to the correct sizing of the cables and the protection devices on the mains power connection line, so as to avoid
possible fires due to short circuits or the overheating of the cables upstream of the machine’s isolator switch, which may cause death
by serious burns and intoxication.
PROHIBITIONS

CLIVET WSAT-2 Specifications

General

Brand	CLIVET
Model	WSAT-2
Category	Air Conditioner
Language	English