31 • IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-
SLVR-1B
Product Manual — Doc.
9323C
Streaming Tab
Select the Streaming tab to modify the camera's streaming settings.
Streaming Tab
The Streaming tab is used to adjust the properties of the native IPvideo streams that are encoded and
transmitted by the camera. 1 Beyond Intelligent cameras can broadcast up to 4 simultaneous
RTSPstreams, while all other supported 1 Beyond cameras output 2 simultaneous streams. Each video
stream can be configured individually.
The following settings can be modified:
l
Stream type:Use the drop-down menu to select the stream that will be configured.
l
Resolution:Use the drop-down menu to select the desired stream resolution independently of the
camera's operating resolution.
l
Video rate type:Use the drop-down menu to select whether the video will be encoded with
constant or variable bit rate. Selecting variable bit rate causes reduced stream bit rate during
static shots with little movement. The bit rate increases as motion increases.
l
Max rate[Kbps]:Set the maximum bit rate of the video stream. The maximum supported value
varies by camera model.
NOTE:For NDI-enabled 1 Beyond cameras, the Max rate[Kbps] setting controls the maximum
bitrate of the camera's NDIstream.
l
Frame rate:Use the drop-down menu to select the stream's frame rate. This value should always
equal the camera's native frame rate.
l
Key frame interval:Set the desired frame rate for the video stream. This value does not have to
equal the camera's native frame rate.
To Next Page
Loading...
Need help?
General
