D-Link DGS-1100-18 User Manual

D-Link DGS-1100 Series Switch User Manual
SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
To view the following window, click Management > SNMP > SNMP Global Settings, as shown
below:
Figure 6-2 SNMP Global Settings window
The fields that can be configured for SNMP Global Settings are described below:
Parameter Description
SNMP Global State
Select this option to enable or disable the SNMP feature.
The fields that can be configured for Trap Settings are described below:
Parameter Description
Trap Global State
Select this option to enable or disable the sending of all or
specific SNMP notifications.
SNMP Authentication Trap
Tick this option to control the sending of SNMP
authentication failure notifications.
Port Link Up
Tick this option to control the sending of port link up
notifications.
Port Link Down
Tick this option to control the sending of port link down
notifications.
Coldstart
Tick this option to control the sending of SNMP ColdStart
notifications.
Warmstart
Tick this option to control the sending of SNMP WarmStart
notifications.
Click the Apply button to accept the changes made.
SNMP Community Table Settings
This window is used to create an SNMP community string to define the relationship between the
SNMP manager and an agent. The community string acts like a password to permit access to the
agent on the Switch. One or more of the following characteristics can be associated with the
community string:
• Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
To view the following window, click Management > SNMP > SNMP Community Table Settings, as
shown below:
3
3
3
3

D-Link DGS-1100-18 Specifications

General

Brand	D-Link
Model	DGS-1100-18
Category	Switch
Language	English