D-Link DGS-1100-18 User Manual

D-Link DGS-1100 Series Switch User Manual
7. Layer 2 Features
FDB
VLAN
Spanning Tree
Loopback Detection
Link Aggregation
L2 Multicast Control
LLDP
FDB
Static FDB
Unicast Static FDB
This window is used to view and configure the static unicast forwarding settings on the Switch.
To view the following window, click L2 Features > FDB > Static FDB > Unicast Static FDB, as
shown below:
Figure 7-1 Unicast Static FDB window
The fields that can be configured are described below:
Parameter Description
Port
Allows the selection of the port number on which the MAC
address entered resides.
VID
Enter the VLAN ID on which the associated unicast MAC
address resides.
MAC Address
Enter the MAC address to which packets will be statically
forwarded or dropped. This must be a unicast MAC address.
Click the Apply button to accept the changes made.
Click the Delete All button to delete all the entries found in the display table.
Click the Delete button to remove the specified entry.
3
3
6
6

D-Link DGS-1100-18 Specifications

General

Brand	D-Link
Model	DGS-1100-18
Category	Switch
Language	English