Appendix B - Technical Specifications D-Link Smart Managed Switch User Manual
1
1
5
5
5
5
OAM
Cable Diagnostics
Reset button (reset to factory default)
Management
Web-based GUI or D-Link Network
Assistant (DNA)
D-Link CLI style
SNMP support
DHCP client
Trap setting for destination IP, system
events, fiber port events, twisted-pair port
events
Password access control
Web-based configuration backup /
restoration
Web-based firmware backup/restore
Firmware upgrade using D-Link Network
Assistant (DNA) & Web-based
management
Reset, Reboot
Surveillance Mode
D-Link Green Technology
Power Saving: Enabled by default to save
power:
- By Link Status: Drastically save power
when the switch port link is down. For
example, no PC connection or the
connected PC is powered off.
- By LED Shut-Off: LEDs can be turned
on/off by port or system through schedule.
- By Port Shut-Off: Each port on the system
can be turned on/off by schedule.
- By System Hibernation: System enters
hibernation by schedule. In this mode,
switches save most power since main
chipsets (both MAC and PHY) are disabled
for all ports, and energy required to power
the CPU is minimal.
To Next Page
Loading...
Need help?
General