Name: D-Link DIR-615
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DIR-615 Wireless N300 Router

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, proceed to the Net / LAN page.

Figure 120. Basic settings of the local interface.

If needed, edit the basic settings of the local interface.

Parameter Description

IP Address

The IP address of the router in the local subnet. By default, the

following value is specified: 192.168.0.1.

Netmask

The mask of the local subnet. By default, the following value is

specified: 255.255.255.0.

When needed settings are configured, click the Apply button.

In the DHCP server section, you can configure the built-in DHCP server of the router.

Figure 121. The section for configuring the DHCP server.

Parameter Description

Mode

An operating mode of the router's DHCP server.

Enable: the router assigns IP addresses to clients automatically in

accordance with the specified parameters. When this value is

selected, the DNS Relay, Start IP, End IP, and the Lease time

fields are displayed on the page.

Disable: the router's DHCP server is disabled, clients' IP addresses

are assigned manually.

Relay: an external DHCP server is used to assign IP addresses to

clients. When this value is selected, the External DHCP server IP

field is displayed on the page.

Page 147 of 208

Other manuals for D-Link DIR-615

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-615 and is the answer not in the manual?

Wireless Signal Rates and Frequency

wireless signal rate	108Mbps • 48Mbps, 54Mbps - 24Mbps, 36Mbps - 12Mbps, 18Mbps - 9Mbps, 11Mbps - 5.5Mbps, 6Mbps - 1Mbps, 2Mbps
MSC wireless signal rate	130Mbps (270) - 117Mbps (243), 104Mbps (216) - 78Mbps (162), 66Mbps (135) - 58.5Mbps (121.5), 52Mbps (108) - 39Mbps (81), 26Mbps (54) - 19.5Mbps (40.5), 12Mbps (27) - 6.5Mbps (13.5)
frequency range	2.4GHz to 2.483GHz

Power and LEDs