Name: D-Link DIR-615
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DIR-615 Wireless N300 Router

User Manual

Configuring via Web-based Interface

Remote Update

Attention! Do not turn off the router before the firmware upgrade is completed. This may

cause the device breakdown.

To update the firmware of the router remotely, follow the next steps:

1. On the System / Firmware upgrade page, in the Remote update section, click the

Check for updates button to check if a newer firmware version exists.

2. Click the OK button in the window displayed to upgrade the firmware of the router. Also

you can upgrade the firmware of the router by clicking the Remote update button (the

button is displayed if a newer version of the firmware is available).

3. Wait until the router is rebooted (about one and a half or two minutes).

4. Log into the web-based interface using the login (admin) and the current password.

After the upgrade is completed, the new version of the firmware will be displayed in the top left

corner of the page.

If after updating the firmware the router doesn't work correctly, please restore the factory default

settings. To do this, place the mouse pointer over the System caption in the top left corner of the

page and click the (Reset to factory) icon. Wait until the router is rebooted.

Page 199 of 208

Other manuals for D-Link DIR-615

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-615 and is the answer not in the manual?

Wireless Signal Rates and Frequency

wireless signal rate	108Mbps • 48Mbps, 54Mbps - 24Mbps, 36Mbps - 12Mbps, 18Mbps - 9Mbps, 11Mbps - 5.5Mbps, 6Mbps - 1Mbps, 2Mbps
MSC wireless signal rate	130Mbps (270) - 117Mbps (243), 104Mbps (216) - 78Mbps (162), 66Mbps (135) - 58.5Mbps (121.5), 52Mbps (108) - 39Mbps (81), 26Mbps (54) - 19.5Mbps (40.5), 12Mbps (27) - 6.5Mbps (13.5)
frequency range	2.4GHz to 2.483GHz

Power and LEDs