Name: D-Link DIR-615
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DIR-615 Wireless N300 Router

User Manual

Configuring via Web-based Interface

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the router and

configure the automatic check for updates of the router's firmware.

Upgrade the firmware only when the router is connected to your PC via a wired

connection.

Figure 154. The System / Firmware upgrade page.

The current version of the router's firmware is displayed next the D-Link logo in the top left corner

of the page.

By default, the automatic check for the router's firmware updates is enabled. If a firmware update is

available, a notification will be displayed in the top right corner of the page.

To disable the automatic check for firmware updates, in the Remote update section, deselect the

Check for updates automatically checkbox and click the Apply settings button.

To enable the automatic check for firmware updates, in the Remote update section, select the

Check for updates automatically checkbox and click the Apply settings button. By default,

in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is

specified.

You can upgrade the firmware of the router locally (from the hard drive of your PC) or remotely

(from the update server).

Page 197 of 208

Other manuals for D-Link DIR-615

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-615 and is the answer not in the manual?

Wireless Signal Rates and Frequency

wireless signal rate	108Mbps • 48Mbps, 54Mbps - 24Mbps, 36Mbps - 12Mbps, 18Mbps - 9Mbps, 11Mbps - 5.5Mbps, 6Mbps - 1Mbps, 2Mbps
MSC wireless signal rate	130Mbps (270) - 117Mbps (243), 104Mbps (216) - 78Mbps (162), 66Mbps (135) - 58.5Mbps (121.5), 52Mbps (108) - 39Mbps (81), 26Mbps (54) - 19.5Mbps (40.5), 12Mbps (27) - 6.5Mbps (13.5)
frequency range	2.4GHz to 2.483GHz

Power and LEDs