DIR-615 Wireless N300 Router
User Manual
Configuring via Web-based Interface
DDNS
On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows
associating a domain name with dynamic IP addresses.
Figure 138. The Advanced / DDNS page.
To add a new DDNS service, click the Add button. In the line displayed, you can specify the
following parameters:
Parameter Description
DDNS Service Select a DDNS provider from the drop-down list.
Host name
The domain name registered at your DDNS provider.
User name The username to authorize for your DDNS provider.
User password
The password to authorize for your DDNS provider.
Update period
An interval (in minutes) between sending data on the router's
external IP address to the relevant DDNS service.
After specifying the needed parameters, click the Apply button.
To edit parameters of the existing DDNS service, select a needed field in the relevant line of the
table, change its value, and click the Apply button.
To remove an existing DDNS service, select the checkbox located to the left of the relevant line in
the table and click the Delete button. Then click the Apply button.
Page 174 of 208
To Next Page
Loading...
Need help?
Wireless Signal Rates and Frequency
Weight and Dimensions
