D-Link DWR-932 User Manual

22D-Link DWR-932 User Manual
Section 3 - Conguration
APN Settings
Auto Connect
Check this option if you want the DWR-932 to
automatically connect to a mobile network after it
has been powered on, or has been disconnected
from its current mobile network.
Manual
Enter the Access Point Name (APN) for the
connection. If you do not know this information,
please contact your service provider.
Click Apply to save changes.
APN Selection Mode
In this section you can congure your APN settings. Depending on your mobile service provider, you may have to input optional settings before
use, if so, you may need to contact your service provider regarding these details.
Access Point Name (APN) Settings

D-Link DWR-932 Specifications

Radio Frequency Bands

FDD-LTE bands	Band 1, 3, 7, 8, 20
TDD-LTE band	38
UMTS bands	B1-2100 MHz / B8-900 MHz

Cellular Access

GSM bands	850/900/1800/1900 MHz
LTE output power class	23 dBm (class3)
Downlink speed	100 Mbps

Wi-Fi Specifications

Wi-Fi standard 1	802.11n
Wi-Fi standard 2	802.11g
Wi-Fi standard 3	802.11b

Physical Specifications

Dimensions	96.8 x 57.6 x 15 mm (3.81 x 2.26 x 0.59 inches)
Weight	90 g (3.17 ounces)
Antenna	One internal antenna

Operating Environment

Operating temperature	0 to 40 °C (14 to 131 °F)
USB interface	micro USB port
USIM slot	Standard 6-pin SIM card interface