Daikin BRC1E63 User Manual

37
1
Return Setting
Energy Saving Options
Sensing Sensor (Low)
Sensing Sensor (Stop)
Setpoint Auto Reset
1/2
• Display the Energy Saving Options screen (Refer
to page34).
• Press “
” buttons to select
Sensing Sensor (Low) .
Press Menu/Enter button to display the Sensing
Sensor (Low) screen.
2
Return Setting
Sensing Sensor (Low)
Adjust Cool SP:
Adjust Time Cool: 30 min
Limit Cool SP: 30°C
Adjust Heat SP: 1.0°C
Adjust Time Heat: 60 min
Limit Heat SP: 15°C
1.0 °C
• Press “ ” buttons to change the setting value
of saving energy operation when the sensor
detects the absence.
• Press “
” buttons to move the cursor.
Press Menu/Enter button after selecting the item.
(Example)
Adjust Cool SP : 1.0°C
Adjust Time Cool : 30 min
Limit Cool SP : 30°C
• If it is determined that there is no person in the
room by sensor during Cooling Operation, the set
temperature will automatically shift by 1°C every
30 minutes until the set temperature is 30°C.
(On Basic screen, set temperature does not
change.)
3
Setting
Save the settings?
Sensing Sensor (Low)
Yes No
Return
• Press “ ” buttons to select Yes .
and return to the Basic screen.
Operation
This function cannot be used at the time of group control.
In case of the simultaneous operation system, the system is controlled by the sensing
sensor mounted in the master indoor unit.
Sensing Sensor (Low)
Energy Saving List
Setpoint Range
Setback Condition

Daikin BRC1E63 Specifications

General

Display	LCD
Temperature Control	Yes
Fan Speed Control	Yes
Weight	150 g
Mode Selection	Auto, Cool, Heat, Dry, Fan
Timer	Yes
Compatibility	Daikin VRV systems
Functions	Mode Selection, Timer
Operating Temperature	0°C to 40°C