Option HEHE (Hydraulic two-position control)
Y
X1
Y
EH
EK
AM
EG
EJ
48.9 [1.93]
M4
W
W
P006 059
X1 Control pressure port ISO 11926-1; 9/16 -18
M4 Servo pressure supply gauge port ISO 11926-1; 9/16 -18
SAE mounting flange per ISO 3019/1 dimensions (mm [in])
Size 060
SAE 127-4
Size 080
SAE 127-4
Size 110
SAE 152-4
Size 160
SAE 152-4
Size 210
SAE 165-4
Size 250
SAE 165-4
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
257.7 [10.15]
267.0 [10.51]
EG
161.9 [6.37] 171.8 [6.76] 194.2 [7.65] 213.5 [8.41]
203.5 [8.01]
247.0 [9.72]
EH
184.8 [7.28] 197.8 [7.79] 215.3 [8.48] 233.8 [9.20]
249.6 [9.83]
259.0 [10.2]
EJ
152.2 [5.99] 162.2 [6.39] 185.5 [7.30] 203.8 [8.02]
223.7 [8.81]
237.0 [9.33]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
227.5 [8.96]
237.0 [9.33]
DIN B4 HL mounting flange per ISO 3019/2 dimensions, (mm [in])
Size 060 – DIN 125 Size 080 – DIN 140 Size 110 – DIN 160 Size 160 – DIN 180 Size 210 – DIN 200
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
257.7 [10.15]
EG
137.4 [5.41] 147.8 [5.82] 161.7 [6.37] 181.6 [7.15]
203.5 [8.01]
EH
184.8 [7.28] 197.8 [7.79] 215.3 [8.48] 233.8 [9.20]
249.6 [9.83]
EJ
127.7 [5.03] 138.2 [5.44] 152.0 [5.98] 171.9 [6.77]
191.7 [7.55]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
227.5 [8.96]
Size 250 is not available.
Cartridge mounting flange dimensions (mm [in])
Size 060
Cartridge 160
Size 080
Cartridge 190
Size 110
Cartridge 200
Size 160
Cartridge 200
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
EG
77.7 [3.06] 69.4 [2.73] 79.7 [3.14] 99.2 [3.91]
EH
184.8 [7.28] 197.8 [7.79] 215.3 [8.48] 233.8 [9.20]
EJ
68.0 [2.68] 59.8 [2.35] 70.0 [2.76] 89.5 [3.52]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
Size 210 and 250 are not available.
Technical Information
H1 Bent Axis Variable Displacement Motors, Size 060/080/110/160/210/250
Dimensions – Controls on H1B motors
©
Danfoss | December 2016 11037153 | BC00000043en-US1103 | 137
To Next Page
Loading...
Need help?
General
