Option HFHF (Hydraulic two-position control)
P006 060
Y
X1
Y
EH
EK
AM
EG
EJ
48.9 [1.93]
M4
W
W
X1 Control pressure port ISO 11926-1; 9/16 -18
M4 Servo pressure supply Gauge port ISO 11926-1; 9/16 -18
SAE mounting flange per ISO 3019/1 dimensions (mm [in])
Size 060
SAE 127-4
Size 080
SAE 127-4
Size 110
SAE 152-4
Size 160
SAE 152-4
Size 210
SAE 165-4
Size 250
SAE 165-4
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
257.7 [10.15]
267.0 [10.51]
EG
164.1 [6.46] 174.0 [6.85] 194.4 [7.73] 215.7 [8.49]
216.9 [8.54]
249.0 [9.80]
EH
185.5 [7.30] 198.4 [7.81] 216.0 [8.50] 234.4 [9.23]
225.6 [8.88]
259.0 [10.2]
EJ
152.2 [5.99] 162.2 [6.39] 184.5 [7.26] 203.8 [8.02]
230.2 [9.06]
237.0 [9.33]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
248.1 [9.77]
237.0 [9.33]
DIN B4 HL mounting flange per ISO 3019/2 dimensions, (mm [in])
Size 060 – DIN 125 Size 080 – DIN 140 Size 110 – DIN 160 Size 160 – DIN 180 Size 210 – DIN 200
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
257.7 [10.15]
EG
139.6 [5.50] 150.0 [5.91] 163.9 [6.45] 183.8 [7.24]
184.9 [7.28]
EH
185.5 [7.30] 198.4 [7.81] 216.0 [8.50] 234.4 [9.23]
225.6 [8.88]
EJ
127.7 [5.03] 138.2 [5.44] 152.0 [5.98] 171.9 [6.77]
198.2 [7.8]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
248.1 [9.77]
Size 250 is not available.
Cartridge mounting flange dimensions (mm [in])
Size 060
Cartridge 160
Size 080
Cartridge 190
Size 110
Cartridge 200
Size 160
Cartridge 200
AM
193.6 [7.62] 206.6 [8.13] 224.1 [8.82] 242.5 [9.55]
EG
79.9 [3.15] 71.6 [2.82] 81.9 [3.22] 101.4 [3.99]
EH
185.5 [7.30] 198.4 [7.81] 216.0 [8.50] 234.4 [9.23]
EJ
68.0 [2.68] 59.8 [2.35] 70.0 [2.76] 89.5 [3.52]
EK
163.3 [6.43] 176.3 [6.94] 193.8 [7.63] 212.3 [8.36]
Size 210 and 250 are not available.
Technical Information
H1 Bent Axis Variable Displacement Motors, Size 060/080/110/160/210/250
Dimensions – Controls on H1B motors
138 |
©
Danfoss | December 2016 11037153 | BC00000043en-US1103
To Next Page
Loading...
Need help?
General
