Danfoss H1B 060 User Manual

Options K1KA, K2KA – electric proportional control with PCOR
K1 – electric proportional 12 V / de-energized = min. displacement / with PCOR
KA – with Pressure Compensator Over Ride / without Brake Pressure Defeat
K2 – electric proportional 24 V / de-energized = min. displacement / with PCOR
KA – with Pressure Compensator Over Ride / without Brake Pressure Defeat
W
Warning
This control is not for use in propel applications.
Hydraulic schematic
B
A
n
N
M4
M5
L2
L1
min max
C1
MA
MB
P301 463
Where:
A, B Main pressure lines
L1, L2 Drain lines
M4, M5 Gauge port servo pressure
MA, MB Gauge port system pressure
N Speed sensor (optional)
Options K1KA, K2KA
Solenoid C1
De-energized = min. displacement
Full-energized = max. displacement
Displacement (%) versus Input Command (mA)
32°
6°
160 bar
[2321 psi]
300 bar
[4351 psi]
PCOR
0 200 400 600 800 1000 1200 1400 1600 1800
P003 486
K1
K2
mA
0%
20%
40%
60%
80%
100%
Z
K1, K2 = K1, K2 Control
Z = Start setting range
Grey area = Intended to be used for zero degree capability.
Below are formulas to calculate start and end input command dependent on displacements:
Technical Information
H1 Bent Axis Variable Displacement Motors, Size 060/080/110/160/210/250
Controls – nomenclature, description
50 |
©
Danfoss | December 2016 11037153 | BC00000043en-US1103

Danfoss H1B 060 Specifications

General

Brand	Danfoss
Model	H1B 060
Category	Engine
Language	English