Danfoss H1B 060 User Manual

Shaft dimensions; mm [in]
Shaft option
EN/ES AN/AS FN/FS BN/BS CN/CS DN/DS
Teeth
13 14 15 21 23 27
Module
8/16 12/24 8/16 16/32 16/32 16/32
Pitch-Ø
41.275 [1.625] 29.633 [1.167] 47.625 [1.875] 33.337 [1.312] 36.513 [1.438] 42.862 [1.687]
Spline
ANSI B92.1-1970 Class 5 flat root side fit
ØA
43.6 [1.717] 31.2 [1.228] 49.96 [1.966] 34.4 [1.315] 37.61 [1.48] 44.0 [1.732]
ØH
55.0 [2.165] 44.5 [1.752] 55.0 [2.165] 44.5 [1.752] 44.5 [1.752] 55.0 [2.165]
ØJ
36.0 [1.417] 25.8 [1.016] 42.2 [1.661] 30.0 [1.181] 32.0 [1.260] 39.6 [1.559]
DA
55.0 [2.165] 37.5 [1.476] 53.0 [2.087] 37.5 [1.476] 37.5 [1.476] 55.0 [2.165]
DB
67.0 [2.638] 47.5 [1.870] 67.0 [2.638] 47.5 [1.870] 47.5 [1.870] 67.0 [2.638]
DC
75.0 [2.953]
75.4 [2.968]
*
55.5 [2.185] 75.0 [2.953]
75.4 [2.968]
*
55.5 [2.185] 55.5 [2.185] 75.0 [2.953]
75.4 [2.968]
*
R
3.0 [0.118] 3.0 [0.118] 3.0 [0.118] 3.0 [0.118] 3.0 [0.118] 3.0 [0.118]
V
M12 M10 M16 M10 M12 M16
Angle
Pressure angle 30°
*
Size 160 only
For DIN 5480 shaft used in combination with SAE flanges, please contact your local Danfoss Power
Solutions representative.
Technical Information
H1 Bent Axis Variable Displacement Motors, Size 060/080/110/160/210/250
Dimensions
98 |
©
Danfoss | December 2016 11037153 | BC00000043en-US1103

Danfoss H1B 060 Specifications

General

Brand	Danfoss
Model	H1B 060
Category	Engine
Language	English