Danfoss VLT 5000-P User Manual

1-10
VLT is a registered Danfoss trademark
Terminal No. Function
55 Common for analog inputs. This common is
isolated from the common of all other power
supplies. If, for example, the drive’s 24 VDC
power supply is used to power an external
transducer, which provides an analog input
signal, terminal 55 must be wired to terminal
39.
60 Programmable 0 to 20 mA or 4 to 20 mA,
analog current input, Resistance = approx.
200 Ω. Used for reference or feedback
signals.
61 RS-485 common.
68, 69 RS-485 interface and serial communication.
Figure 1-2. Control Terminals Electrical Diagram
Located on power card

Danfoss VLT 5000-P Specifications

General

Brand	Danfoss
Model	VLT 5000-P
Category	DC Drives
Language	English