Datalogic Matrix 210 Programming Manual

HOST MODE PROGRAMMING
16
3
Parameter Depth > 1
<ESC> CHR1 CHR2 [CHR3 <FE
H
> <FD
H
>] DATA <ESC> I A #
Where:
 CHR1:
Character identifying the Function of the parameter to get.
 CHR2,CHR3:
Character indicating the Depth of the parameter to get.
 <FE
H
>,<FD
H
>
Special characters used to indicate parameter Depth > 9.
 DATA:
Character or string indicating the current parameter Value.
If sequence contents are wrong (i.e. a typing error in the file) or due to a transmission error,
the Slave device replies with the following message:
<ESC> W 1 <CR><LF>
After transmitting the proper reply message, the Slave device then waits for one or more get
strings or one or more programming strings or the exit from host mode command.

Datalogic Matrix 210 Specifications

General

Resolution (mm)	0.1 mm
Drop Specification	1.5 m
Technology	Imager
Interface	RS-232, USB, Ethernet
Illumination	Red LED
Scan Rate	60 fps
Light Source	White or Red LED
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 60°C
Humidity	90% non-condensing
Dimensions (mm)	170 x 85 x 160 mm
Power Supply	5V DC