Symbologies Enter/Exit Programming Mode
Product Reference Guide
195
Code 11 Set Length 1
This feature specifies one of the bar code lengths for Code 11 Length Control
on page 194. Length 1 is the minimum label length if in Variable Length on
page 194 Mode, or the first fixed length if in Fixed Length on page 194 Mode.
Length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters, in increments of two. See "Set
Length 1" on page 304 for more detailed programming instructions.
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
04 = Length 1 is 4 Characters
To Next Page
Loading...
Need help?
General
