Enter/Exit Programming Mode
266 QuickScan™ I QM21X1 / QBT21X1
Bluetooth-Only Features
The features in this section are valid only for QuickScan Bluetooth models.
RF ADDRESS STAMPING
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be transmit-
ted to the host and, if so, at what position with respect to the label data. See
page 306 in “References” for detailed information and examples for setting this
feature.
NOTE
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
Source Radio Address Transmission = Do Not Include
Source Radio Address Transmission = Prefix
To Next Page
Loading...
Need help?
General
