Enter/Exit Programming Mode
Product Reference Guide
273
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good transmission as soon as the
Base Station receives a label
• ACK when sent to host — scanner signals a good transmission as soon as
the Base Station has sent the label to the host
• ACK from host — scanner signals a good transmission as soon as the Base
Station has sent the label to the host and host has replied with an
acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
NOTE
ACK from host works only for RS232 or USB-COM interfaces with
ACK/NACK disabled. If ACK from host is configured with any other
interface conditions, it works like ACK when sent to host.
See
"Message Formatting"
on page 275 for details.
NOTE
The Base Station can receive a host message only if Host Com-
mands Obey/Ignore (page 25 ) is set to Ignore.
To Next Page
Loading...
Need help?
General
