Enter/Exit Programming Mode MSI
220 QuickScan™ I QM21X1 / QBT21X1
MSI Set Length 2
This feature specifies one of the bar code lengths for MSI Length Control on
page 218. Length 2 is the maximum label length if in Variable Length on page
218 Mode, or the second fixed length if in Fixed Length on page 218 Mode.
Length includes the bar code’s check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length). See "Set Length 2" on page 305 for more
detailed programming instructions.
$CMSL2
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
