Dell 6 series User Manual

110 Configuring and Managing RAID
After you enable the BIOS for a controller, perform the following steps to
enable the boot support for that controller.
1
Press <Ctrl><N> to access the Ctrl Mgmt menu screen.
2 Press <Tab> to move the cursor to the Select Bootable VD in the
Settings box.
3 Press the down-arrow key to display a list of virtual disks.
4 Use the down-arrow key to highlight a virtual disk.
5 Press <Enter> to select the virtual disk.
6 Press <Tab> to move the cursor to the Apply button, and then press
<Enter> to apply the selection.
Boot support is enabled for the selected controller.
Enabling BIOS Stop on Error
The option BIOS Stop on Error is used to stop the system from booting if
there are BIOS errors. Perform the following steps to enable BIOS Stop on
Error.
1
Press <Ctrl><N> to access the Ctrl Mgmt menu screen.
2 Press <Tab> to move the cursor to Enable BIOS Stop on Error in the
Settings box.
3 Press the spacebar to select Enable BIOS Stop on Error .
An
X displays beside Enable BIOS Stop on Error .
4 Press <Tab> to move the cursor to the Apply button, and then press
<Enter> to apply the selection.
The controller BIOS is enabled. To disable
Enable BIOS Stop on Error ,
use the spacebar to de-select
Enable BIOS Stop on Error , then select
Apply and press <Enter>.
Dell_PERC6.2_UG.book Page 110 Wednesday, June 24, 2009 6:08 PM

Dell 6 series Specifications

General

Processor	Intel Core i5 or i7
Graphics	Intel HD Graphics
Display	15.6-inch HD
Operating System	Windows 7
Battery	6-cell Lithium-Ion