Configuring and Managing RAID 111
Restoring Factory Default Settings
You can use the Ctrl Mgmt menu screen to restore the default settings for the
options in the Settings box. The settings are Enable Controller BIOS,
Enable Alarm, and Enable BIOS Stop on Error. Perform the following steps
to restore default settings:
1
Press <Ctrl><N> to access the
Ctrl Mgmt
menu screen.
2
Press <Tab> to move the cursor to the
Settings
box.
3
Use the spacebar to de-select the settings for the options in the
Settings
box.
4
Press <Tab> to move the cursor to the
Factory Default
box, and press the
<Alt>, <Enter>, or the spacebar.
A dialog box displays for you to confirm your choice.
5
Select <OK> and press <Enter>.
The defaults are automatically selected for the controller settings and are
displayed in
Settings
.
Dell_PERC6.2_UG.book Page 111 Wednesday, June 24, 2009 6:08 PM
To Next Page
Loading...
Need help?
General
