Dell Data Domain DD6300 User Manual

When the DIMM is fully seated you will hear a snap and feel the
c
onnector latches click into place.
Verify the DIMMs
Steps
1. Power up and system boot.
2. Log in.
3. Enter the system show meminfo command to see the top level summary. Confirm that the system reports the correct
amount of memory. The output, as shown for a 96 GB system, should be similar to the following:
# s
ystem show meminfo
Memory Usage Summary
Total memory: 98304 MiB
Free memory: 49152 MiB
Total swap: 983 MiB
Free swap: 983 MiB
4. Enter the enclosure show memory command to verify all DIMMs are discovered.
# e
nclosure show memory
This command may take up to a minute to complete. Please wait...
Enclosure 1
Number of DIMMS : 12
Memory Size: 98304 MiB
Locator Speed Size Part No. Serial No.
(MHz) (MiB)
------- ------- ------ ------------------ ----------
DIMM 0 2133 8192 18KSF1G72PDZ-1G6E1 DFBDA944
DIMM 2 2133 8192 18KSF1G72PDZ-1G6E1 32237E96
DIMM 4 2133 8192 18KSF1G72PDZ-1G6E1 DFBDA967
DIMM 5 2133 8192 18KSF1G72PDZ-1G6E1 32237E98
DIMM 6 2133 8192 18KSF1G72PDZ-1G6E1 32237D72
DIMM 7 2133 8192 18KSF1G72PDZ-1G6E1 32237EAF
DIMM 8 2133 8192 18KSF1G72PDZ-1G6E1 32237D6F
DIMM 9 2133 8192 18KSF1G72PDZ-1G6E1 32237EAD
DIMM 10 2133 8192 18KSF1G72PDZ-1G6E1 DFBDA950
DIMM 11 2133 8192 18KSF1G72PDZ-1G6E1 DFBDA94F
DIMM 13 2133 8192 18KSF1G72PDZ-1G6E1 32237EAB
DIMM 15 2133 8192 18KSF1G72PDZ-1G6E1 DFBDA94D
5. Check for any new DIMM alerts.
# a
lerts show current
No active alerts.
Field Replaceable Units 33

Dell Data Domain DD6300 Specifications

General

Brand	Dell
Model	Data Domain DD6300
Category	Network Hardware
Language	English