EasyManuals Logo

Dell EMC PowerEdge R750xs 60KKP User Manual

Dell EMC PowerEdge R750xs 60KKP
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Next steps
1. Follow the procedure listed in After working inside your system.
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. If installed, remove the expansion card riser.
Steps
1. Open the blue latch to unlock the OCP card.
2. Push the OCP card towards the rear end of the system to disconnect from the connector on the system board.
3. Slide the OCP card out of the slot on the system.
118
Installing and removing system components

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell EMC PowerEdge R750xs 60KKP and is the answer not in the manual?

Dell EMC PowerEdge R750xs 60KKP Specifications

General IconGeneral
Form Factor2U rack server
ProcessorUp to 2 x Intel Xeon Scalable processors, up to 32 cores per processor
MemoryUp to 2TB DDR4, 3200MT/s, 16 DIMM slots
StorageUp to 12 x 3.5" SAS/SATA (HDD/SSD)
RAID ControllerPERC H745, H755, HBA355i
Network1GbE, 10GbE, 25GbE
Power Supply1100W

Related product manuals