76 Coin-Cell Battery
Replacing the Coin-Cell Battery
1
Follow the instructions in "Before You Begin" on page 9.
2
With the positive side up, snap the coin-cell battery into the battery
socket on the system board.
3
Follow the instructions from step 5 to step 18 in "Replacing the System
Board" on page 72.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 coin-cell battery 2 plastic scribe
book.book Page 76 Friday, April 13, 2012 2:02 PM