Option Description
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1 – F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Lock Mode Disable/Standard This option is selected by default.
● Lock Mode Enable/Secondary
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal This option is selected by default.
● Thorough
● Auto
Extended BIOS
POST Time
Allows you to create an additional pre-boot delay. The options are:
● 0 seconds This option is enabled by default.
● 5 seconds
● 10 seconds
Warnings and
Errors
Allows you to select in the BIOS setup options that cause the boot process to pause only, when warnings
or errors are detected rather than stop, prompt and wait for user input. The options are:
Prompt on Warnings and Errors. This option is enabled by default.
Continue on Warnings
Sign of Life Indication
Manageability
Option
Description
USB Provision Allows you to enable or disable provisioning the Intel AMT from a USB storage device.
Enable USB Provision This option is not selected by default.
MEBx Hotkey
Allows you to specify whether the MEBx Hotkey function should be enabled, during the system boot.
Enable MEBx Hotkey. This option is selected by default.
Virtualization Support options
Option
Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology This option is selected by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O This option is selected by default.
Trusted
Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution This option is disabled by default.
Wireless screen options
Option
Description
Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
66 System setup
To Next Page
Loading...
Need help?
General
