Option Description
● WWAN
● GPS (on WWAN Module)
● WLAN
● Bluetooth
All the options are enabled by default.
NOTE: For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled
or disabled independently.
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
● WWAN/GPS
● WLAN
● Bluetooth
All the options are enabled by default.
Maintenance
Option
Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade Allows you to control flashing of the system firmware to previous revisions. The option are:
Allows BIOS Downgrade This option is enabled by default.
Data Wipe Allows you to securely erase data from all internal storage devices. The process adheres to Serial ATA
Security Erase and eMMC JEDEC Sanitize specifications. The option are:
Wipe on Next Boot This option is disabled by default.
BIOS Recovery Allows you to recover from certain computed BIOS conditions from a recovery file on the user primary
hard drive or an external USB key. When 'Enabled' is selected BIOS stores the recovery file on the user
primary hard drive.The option are:
BIOS Recovery from Hard Drive This option is enabled by default.
System Log
Option
Description
BIOS Events Allows you to view and clear the System Setup (BIOS) POST events.
Thermal Events Allows you to view and clear the System Setup (Thermal) events.
Power Events Allows you to view and clear the System Setup (Power) events.
System and setup password
Table 15. System and setup password
Password type Description
System password Password that you must enter to log in to your system.
Setup password Password that you must enter to access and make changes to
the BIOS settings of your computer.
System setup 67
To Next Page
Loading...
Need help?
General
