Update with your book title 107
•
Admin Status
— Enables or disables traffic forwarding through the selected LAG.
•
Current LAG Status
— Indicates if the LAG is currently operating.
•
Operational Status
— Operational status of the LAG.
•
Admin Auto Negotiation
— Enables or disables Auto Negotiation on the LAG. Auto-negotiation is a
protocol between two link partners that enables a LAG to advertise its transmission rate and flow
control (the flow control default is enabled) abilities to its partner.
•
Current Auto Negotiation
— The currently configured Auto Negotiation setting.
•
Admin Speed
— The speed at which the LAG is operating.
•
Current LAG Speed
— The currently configured speed at which the LAG is operating.
•
Admin Advertisement
— The speed that the LAG advertises. Options include Maximum Capacity, 10
MB Half-Duplex, 10 MB Full-Duplex, 100 MB Full-Duplex and 1000 MB Full-Duplex.
•
Current Advertisement
— The port advertises its speed to its neighbor port to start the negotiation
process. The possible field values are those specified in the
Admin Advertisement
field.
•
Neighbor Advertisement
— Indicates the neighboring port’s advertisement settings. The field values
are identical to the Admin Advertisement field values.
•
Admin Flow Control
— Enables/disables flow control, or enables the auto negotiation of flow control
on the LAG.
•
Current Flow Control
— The user-designated flow control setting.
Defining LAG Parameters
1
Open the
LAG Configuration
page.
2
Select a LAG in the
LAG
field.
3
Define the fields.
4
Click
Apply Changes
.
The LAG parameters are saved to the device.
Modifying LAG Parameters
1
Open the
LAG Configuration
page.
2
Select a LAG in the
LAG
field.
3
Modify the fields.
4
Click
Apply Changes
.
The LAG parameters are saved to the device.
Displaying the LAG Configuration Table:
1
Open the
LAG Configuration
page.
2
Click
Show All.
To Next Page
Loading...
Need help?
General
