Dell PowerConnect 2816 User Manual

92 Update with your book title
Deleting Static Hosts
1 Open the Static Hosts page.
2 Click Show All .
The Static Hosts Table page opens.
3
Check the Remove checkbox next to a static host.
4 Click Apply Changes . The host is deleted, and the device is updated.
Configuring Address Binding
The Address Binding page displays a list of the DHCP server’s allocated IP addresses and each IP
address’s client identifier, lease expiration time, and allocation type. Open the Address Binding page,
click System
→ DHCP Server → Address Binding in the tree view.
Figure 6-31. Address Binding
• IP Address — Displays the IP addresses of the clients whose bindings are displayed.
•
Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,
e.g., 01b6.0819.6811.72.
•
Lease Expiration — Displays the lease expiration date and time of the host’s IP address.
•
Ty p e — Displays the manner in which the IP address was assigned to the host:
–
Static allocation — The network administrator maps the hardware address of a host to an IP
address on the DHCP server.
–
Permanent allocation — An IP address received through a standard request-reply mechanism is
owned by a client permanently (unless changes in the network environment/connections take
place, for any reason).
–
Dynamic allocation — A network device obtains a leased IP address for a specified period of time.
The IP address is revoked at the end of this period and the switch must request another IP address.

Dell PowerConnect 2816 Specifications

General

Brand	Dell
Model	PowerConnect 2816
Category	Switch
Language	English