Dell PowerEdge M610 User Manual

108 About Your System
Memory
Initialization
Warning: Memory
size may be
reduced
Invalid configuration. The
system will run but with
less memory than is
physically installed.
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
Unsupported memory
configuration.
DIMM mismatch
across slots
detected:
Invalid memory
configuration. DIMMs are
mismatched in the
specified slots.
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
Unsupported DIMM
detected. The
following DIMM has
been disabled:
Invalid memory
configuration. The system
will run but with the
specified DIMM disabled.
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
DIMM configuration
on each CPU should
match
Invalid memory
configuration on a dual-
processor system. The
DIMM configuration for
each processor must be
identical.
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
Maximum rank count
exceeded. The
following DIMM has
been disabled:
Invalid memory
configuration. The system
will run but with the
specified DIMM disabled.
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory" on
page 159.
Table 1-26. Blade Messages
(continued)
Message Causes Corrective Actions

Dell PowerEdge M610 Specifications

General

Brand	Dell
Model	PowerEdge M610
Category	Server
Language	English