Dell PowerEdge M610 User Manual

Installing Blade Components 163
Non-Optimal Memory Configurations
System performance can be affected if your memory configuration does not
conform to the preceding installation guidelines. Your system may issue an
error message during start-up stating that your memory configuration is non-
optimal.
Memory Sparing Support – PowerEdge M910
Memory sparing (spare bank) is supported in systems that have one of the
memory configurations shown in Table 3-2.
The memory sparing feature must
also be enabled in the Memory Information screen of the System Setup
program. See "Memory Settings Screen
" on page 130 . To use memory sparing,
you must disable node interleaving.
System Memory – PowerEdge M905
You can upgrade your system memory to a maximum of 192 GB by installing
up to twenty-four 667 MHz registered DDR2 memory modules in sets of
1 GB, 2 GB, 4 GB, or 8 GB memory modules. (Dual-rank 8 GB modules are
supported; quad-rank 8 GB modules are not supported.) Each processor has
four memory channels, organized in sets of two channels.
NOTE: If more than four memory modules are installed per processor, the memory
modules are downclocked to operate at 533 MHz.
Table 3-2. Memory Sparing Configurations - PowerEdge M910
Total
System
Memory
Usable
System
Memory
Memory Modules -
Number and Size
Memory Module Locations
128 GB 112 GB Thirty-two 4 GB A1, A2, A3, A4, A5, A6, A7, A8, B1, B2,
B3, B4, B5, B6, B7, B8, C1, C2, C3, C4,
C5, C6, C7, C8, D1, D2, D3, D4, D5,
D6, D7, D8
256 GB 224 GB Thirty-two 8 GB
512 GB 448 GB Thirty-two 16 GB

Dell PowerEdge M610 Specifications

General

Brand	Dell
Model	PowerEdge M610
Category	Server
Language	English