204 Installing Blade Components
SD Card
PowerEdge M905 and M805
In these blades, the SD card is an unmanaged persistent storage card. A
hypervisor may be installed using this card.
1
Remove the blade. See "Removing a Blade" on page 145.
2
Install the
SD
card in the lower card slot. See Figure 3-24.
3
Install the blade. See "Installing a Blade" on page 148.
Figure 3-24. Installing and Removing an SD Card (PowerEdge M805 and M905)
1 SD card 2 SD card connector
To Next Page
Loading...
Need help?
General