212 Installing Blade Components
Installing the RAID Battery
1
Insert the battery.
For systems with a battery carrier:
a
Insert the RAID battery into the battery carrier. See Figure 3-27.
b
Align the tabs on the battery carrier with the battery carrier slots on
the chassis.
c
Slide the battery carrier into the battery carrier slots until it locks into
place. See Figure 3-27.
For M910, slide the battery in to secure the tabs on the RAID battery in
the battery carrier on the system board (see Figure 3-28).
For M710, M610, and M610x, slide the battery in to secure the tabs on the
RAID battery to the metal standoffs on the system board (see Figure 3-29
and Figure 3-30).
2
Connect the battery cable to the connector on the storage card.
3
Close the system. See "Closing the Blade" on page 159.
4
Install the blade. See "Installing a Blade" on page 148.
To Next Page
Loading...
Need help?
General