Front I/O Panel 97
Installing the Front I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 13).
3
Align the screw holes on the front I/O panel with the screw holes on the
chassis, and then tighten the two screws.
1 screws (2) 2 front I/O panel
1
2
book.book Page 97 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
Need help?
General
