Denon AVR-887 User Manual

1
Basic Operation Basic Operation
36
ENGLISH
ENGLISH
Press ENTER or SURROUND PARAMETER.
Press
GG
to select “OFF”.
Press
DD HH
to select “Bass” or “Treble”, then press
FF
GG
to set the level.
Can be adjusted within the range of –6 dB to +6 dB.
3
4
5
Set “Tone Defeat” to “ON” at step 3 in “Adjusting the
tone”.
Adjusting the speaker volume
Press [CH SELECT].
Press
DD HH
or [CH SELECT] to select the speaker.
The settable speaker switches each time this button is pressed.
Press [
FF GG
] to adjust the volume.
The SW channel level can be turned off by decreasing it one step
from –12.0 dB.
OFF ´ –12.0 dB ´ +12.0 dB
1
2
3
Setting the tone control
Adjust the bass and treble to suit your tastes.
Press SURROUND PARAMETER.
Press
DD HH
to select “TONE”, then press
FF
.
In the direct mode, “TONE” cannot be selected.
1
2
¢ Adjusting the tone
¢ When you do not want to adjust the tone
Using the fader function
With this function, the volume of all the front side speakers or all the
rear side speakers can be adjusted (attenuated) at once.
Press [CH SELECT].
Press
DD HH
or [CH SELECT] to select “Fader”.
Press [
FF
] to attenuate the volume of all the front side
speakers, [
GG
] to attenuate the volume of all the rear
side speakers.
The fader function does not affect the subwoofer.
It is possible to adjust so that the volume of the speaker whose
volume is the lowest is –12.0 dB.
1
2
3
2
3
1
2
3
• “SB” when surround back speaker set to “1spkr”. Not displayed
when “None” set.

Denon AVR-887 Specifications

Power

rated output front	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output front alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output center	100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output center alternative	135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround back	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround back alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
power supply	AC 120 V, 60 Hz
power consumption	5.5 A

Audio Inputs and Outputs

analog inputs	9 sets
analog ext inputs	8
digital inputs optical	4
digital inputs coaxial	2
audio delay function	0 - 200 msec.
variable subwoofer crossover	40/60/80/90/100/110/120/150/200/250 Hz

Video Inputs and Outputs

component video inputs	3 sets
composite inputs	5
s-video inputs	5
component video outputs	1 set
composite outputs	3
s-video outputs	3

Audio Performance

frequency response	10 Hz - 100 kHz (+1, -3 dB)
signal-to-noise ratio	100 dB (IHF-A weighted)
tone control treble	±6 dB at 10 kHz
tone control bass	±6 dB at 100 Hz

Weight and Dimensions

dimensions	17-3/32” (W) x 6-47/64” (H) x 16-27/64” (D)
dimensions metric	434 (W) x 171 (H) x 417 (D) mm
weight	29 lbs 5 oz
weight metric	13.0 kg