Denon AVR-887 User Manual

ENGLISH
50
ENGLISH
Advanced Setup – Part 1 Advanced Setup – Part 1
Press
FF GG
to set.
Setting the EXT. IN Subwoofer Level
Press
DD HH
to select “EXT. IN Subwoofer Level”, then
press ENTER.
Press
FF GG
to set.
Press ENTER.
1
2
3
Sets the playback level of the analog signal that was input to the EXT.
IN subwoofer terminal.
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold
separately) audio and/or video signals to any input terminals on the
AVR-887 and play them.
1
Press
DD HH
to select “iPod Assign”, then press ENTER.
OFF:
This is the factory default setting.
CD, CDR/TAPE:
When using a Control Dock for iPod, it is possible to connect with
the audio input terminal of the assigned function.
DVD/VDP, TV/DBS, VCR-1, VCR-2, V. AUX:
When using a Control Dock for iPod, it is possible to connect with
the audio and video input terminals of the assigned function.
2
Press ENTER.
3
1
2
1
2
(When “VCR-2” is selected)
hh
Setting the Input Function Level
Press
DD HH
to select “Input Function Lev.”, then press
ENTER.
• After completing this setting, check that the playback levels for the
different sources are the same.
1
Press
DD HH
to select the input source, then press
FF GG
to set.
The volume can be adjusted within the range –12 dB to +12 dB.
2
Press ENTER.
3
The playback level is corrected individually for the different input
sources.
1
2

Denon AVR-887 Specifications

Power

rated output front	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output front alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output center	100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output center alternative	135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround back	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround back alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
power supply	AC 120 V, 60 Hz
power consumption	5.5 A

Audio Inputs and Outputs

analog inputs	9 sets
analog ext inputs	8
digital inputs optical	4
digital inputs coaxial	2
audio delay function	0 - 200 msec.
variable subwoofer crossover	40/60/80/90/100/110/120/150/200/250 Hz

Video Inputs and Outputs

component video inputs	3 sets
composite inputs	5
s-video inputs	5
component video outputs	1 set
composite outputs	3
s-video outputs	3

Audio Performance

frequency response	10 Hz - 100 kHz (+1, -3 dB)
signal-to-noise ratio	100 dB (IHF-A weighted)
tone control treble	±6 dB at 10 kHz
tone control bass	±6 dB at 100 Hz

Weight and Dimensions

dimensions	17-3/32” (W) x 6-47/64” (H) x 16-27/64” (D)
dimensions metric	434 (W) x 171 (H) x 417 (D) mm
weight	29 lbs 5 oz
weight metric	13.0 kg